Máy chủ SuperServer SYS-F619P2-RTN
Key Features SuperServer SYS-F619P2-RTN
8 Hot-plug System Nodes in 4U
Processor: 1 x Intel® Xeon® Processor SKL-SP 4110 8C/16T 2.1G 11M 9.6GT UPI
Memory: 16GB DDR4.
Network Controller: Flexible networking via SIOM
Raid: SATA3 (6Gbps); RAID 0, 1, 5, 10
Storages: 6 Hot-swap 2.5″ SATA3 or 2 Hot-swap2.5″ SATA3 + 4 NVMe U.2
Power: 2200W Redundant Power Supplies
Form Factor: Rackmount 4U
1. Dual socket P (LGA 3647) supports Intel® Xeon® Scalable Processors, Dual UPI up to 10.4GT/s
2. Up to 1.5TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 12 DIMM slots
3. Expansion slots: 1 PCI-E 3.0 x16 (LP) 1 PCI-E 3.0 x16 (for SIOM )
4. 6 Hot-swap 2.5″ SATA3 or 2 Hot-swap 2.5″ SATA3 + 4 NVMe U.2
5. SIOM Network card, 1 dedicated IPMI LAN port
6. 1 VGA, 2 USB 3.0 ports
7. 3x 4cm 20k RPM middle fans
8. 2200W Redundant Power Supplies Titanium Level (96% Efficiency)
Product SKUs
SYS-F619P2-RTN
• SuperServer F619P2-RTN (Black)
Motherboard
Super X11DPFR-SN
Processor/Cache
CPU
• Dual Socket P (LGA 3647)
• Intel® Xeon® Scalable Processors,
Dual UPI up to 10.4GT/s
• Support CPU TDP 70-165W with IVR
Cores
• Up to 28 Cores with Intel® HT Technology
System Memory
Memory Capacity
• 12 DIMM slots
• Up to 1.5TB ECC 3DS LRDIMM, 1.5TB ECC RDIMM, DDR4 up to 2666MHz
Memory Type
• 2666/2400/2133MHz ECC DDR4 SDRAM
On-Board Devices
Chipset
• Intel® C621 chipset
SATA
• SATA3 (6Gbps); RAID 0, 1, 5, 10
Network Controllers
• Flexible networking via SIOM
IPMI
• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
• ASPEED AST2500 BMC
Input / Output (per node)
SATA
• 14 SATA3 (6Gbps) ports
NVMe
• 4 NVMe U.2 option
LAN
• SIOM flexible Network card
• 1 RJ45 Dedicated IPMI LAN port
USB
• 2 USB 3.0 ports (rear)
VGA
• 1 VGA port
System BIOS
BIOS Type
• 128Mb SPI Flash EEPROM with AMI BIOS
Management
Software
• Intel® Node Manager
• IPMI 2.0
• KVM with dedicated LAN
• SuperDoctor® 5
• Watch Dog
Power Configurations
• ACPI Power Management
PC Health Monitoring
CPU
• Monitors for CPU Cores, Chipset Voltages, Memory.
• 4+1 Phase-switching voltage regulator
FAN
• Fans with tachometer monitoring
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors
Temperature
• Monitoring for CPU and chassis environment
• Thermal Control for fan connectors
Chassis
Form Factor
• 4U Rackmount
Model
• CSE-F418BC2-R2K20BP
Dimensions and Weight
Width • 17.63" (448mm)
Height • 6.96" (177mm)
Depth • 29" (737mm)
Package • 28.3" (W) x 15.0" (H) x 42.4" (D)
Weight • Net Weight: 150 lbs (68.04 kg)
• Gross Weight: 200 lbs (90.71 kg)
Available Colors
• Black
Front Panel
Buttons
• Power On/Off button
• UID button
LEDs
• Power status LED
• Hard drive activity LED
• Network activity LEDs
• Information LED (UID, Fan failure, Overheat)
Expansion Slots (per node)
PCI-Express
• 1 PCI-E 3.0 x16 (Low-profile)
• 1 PCI-E 3.0 x16 (SIOM)
Drive Bays (per node)
Hot-swap
• 6 Hot-swap 2.5" SATA3 or 2 Hot-swap 2.5" SATA3 + 4 NVMe U.2
M.2
• M.2 Support
Backplane
1 SAS/SATA backplane
System Cooling (per node)
Fans
• 3x 4cm 20k RPM middle fans
Power Supply
2200W Redundant Power Supplies with PMBus
Total Output Power and Input
• 1200W with Input 100-127Vac
• 1800W with Input 200-220Vac
• 1980W with Input 220-230Vac
• 2090W with Input 230-240Vac
• 2200W with Input 220-240Vac (for UL/cUL use only)
• 2090W with Input 230-240Vdc (for CCC only)
AC Input Frequency
• 50-60Hz
Dimension (W x H x L)
• 76 x 40 x 336 mm
+12V
• Max: 100A / Min: 0A (100-127Vac)
• Max: 150A / Min: 0A (200-220Vac)
• Max: 165A / Min: 0A (220-230Vac)
• Max: 174.17A / Min: 0A (230-240Vac)
• Max: 183.3A / Min: 0A (220-240Vac)
5VSB
• Max: 1A / Min: 0A
Output Type
• Backplanes (gold finger)
Copyright @ 2013 by Việt Máy Chủ . All Rights Reserved.