A+ Server 2021M-32RV / 2021M-32RB


Số lượng:
Giá bán: 0 VND

MÔ TẢ SẢN PHẨM A+ SERVER 2021M-32RV / 2021M-32RB

Key Features
1. Two Six-Core AMD Opteron™ 2000 Series (Socket F) processor support; HT3.0 Link support
2. nVidia MCP55 Pro / AMD 8132 Chipset
3. 8 x 3.5" Hot-swap SAS / SATA Drive Bays
4. Up to 64GB DDR2 800/667/533 SDRAM
5. 2 (x8) PCI-e, 1 (x4) PCI-e (in x8 slot), 1 64-bit 133MHz PCI-X, 2 64-bit 133/100MHz PCI-X Low-profile Add-on Cards Only
6. Dual-port Gigabit LAN/Ethernet Controller
7. 700W High-Efficiency Redundant Power Supply

 


Integrated Board

Super H8DM3-2
Product SKUs
AS-2021M-32RV * A+ Server 2021M-32R (Silver)
AS-2021M-32RB * A+ Server 2021M-32RB (Black)
Motherboard
Super H8DM3-2
Processor/Chipset
CPU * Dual 1207-pin Socket F
* Supports up to two Six-Core AMD Opteron™ 2000 Series (Socket F) processors
* HT3.0 Link support
Chipset * nVidia MCP55 Pro
* AMD 8132
System Memory
Memory Capacity * 8x 240-pin DIMM sockets support up to 64GB DDR2 800/667/533/400 MHz SDRAM
* For Single CPU: Memory must be populated in CPU1 DIMMs only
* For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
* Dual channel memory bus
Memory Type * DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes * 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage * 1.8V only
On-Board Devices
SAS * 8-Port LSI 1068E SAS Controller *
* SAS RAID 0, 1, 10, JBOD Support
SATA * nVidia MCP55 Pro SATA2 3.0Gbps Controller
* 6 SATA2 Ports
* nVidia RAID 2.0
* SATA RAID 0, 1, 0+1, 5 JBOD Support
IPMI * Intelligent Platform Management Interface v.2.0, Low Profile
* RMM (Remote Management Module)
* (Optional: AOC-SIMLP-B(+)  R 3.00)
* (Optional: AOC-SIMLP-3(+)  R 3.00) with 3rd LAN support
* (Card not included)
Network Controllers * nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
* Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA * ATI ES1000 Graphics Controller
Super I/O * Winbond 83627HF
Input / Output
SAS * 8 SAS ports
SATA * 6 SATA2 ports
IDE * Single EIDE channel support up to two UDMA IDE devices
* Supports UDMA Mode 5
* Supports PIO Mode 4
* Supports ATA 100/133
Floppy * 1 Floppy port; 1.44 MB support
LAN * 2 RJ45 LAN ports
USB * Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
* 2 Rear Ports
* 4 Internal Headers
VGA * 1 VGA port
Keyboard / Mouse * PS/2 keyboard and mouse ports
Serial Ports * 1 Fast UART 16550 serial port
* 1 serial port header
System BIOS
BIOS Type * 8Mb Flash EEPROM with AMI® BIOS
BIOS Features * Plug and Play (PnP)
* DMI 2.3
* PCI 2.2
* ACPI 2.0
* USB Keyboard Support
* SMBIOS 2.3
Chassis
Form Factor * 2U Rackmountable
* Optional Rackmount Kit (CSE-PT26)
Model SC825TQ-R700LPV
Dimensions
Height 3.5" (89mm)
Width 17.2" (437mm)
Depth 25.5" (648mm)
Gross Weight 56 lbs (25.4kg)
Available Colors Silver, Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED
Ports 2x USB Ports + DB9 COM Port (optional)
Drive Bays
Hot-swap * 8 x 3.5" SAS / SATA Hot-swap drive trays (supports SES2 drives)
Peripheral Drives
DVD-ROM * Slim 8x DVD, 24x CD, DVD-ROM Drive
Floppy * Slim 1.44MB Floppy Drive (Optional)
Expansion Slots
PCI-Express * 2 x8 PCI-e slots
* 1 x4 PCI-e (in a x8 physical slot)
* 1 SEPC (Supermicro extended Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)
PCI-X * 1 64-bit 133MHz PCI-X (3.3V) slots
* 2 64-bit 133/100MHz PCI-X (3.3V) slots
IPMI * IPMI 2.0 expansion slot
Addon Card Type * Supports low-profile full-length addon cards
Backplane
1x 2U SAS / SATA backplane w/ SES2 Enclosure Management
System Cooling
Fans * 3x 80mm 6300 RPM fans
Shroud * 1x Air Shroud
Power Supply
700W AC-DC power supply and power distributor w/ PFC
AC Input 100 - 240V, 60-50Hz, 10 - 4 Amp
+5V standby 4 Amp
+12V 57 Amp
+5V 30 Amp
+3.3V 24 Amp
-12V 0.6 Amp
PC Health Monitoring
CPU * Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
* CPU 4-Phase-switching voltage reulator
FAN * Total up to 8-fan status tachometer monitoring
* Up to six 3-pin and two 4-pin fan headers
* Status monitor for speed control
* 3-pin fan support
* Low noise fan speed control
* Pulse Width Modulated (PWM) fan connectors
Temperature * Monitoring for CPU and chassis environment
* CPU Thermal Trip Support
* I2C Temperature Sensing Logic
LED * CPU / System Overheat LED
* +5V Standby Alert LED
Other Features * Chassis Intrusion Detection
* Chassis Intrusion Header
* Chipkill Support


 

Parts List

Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-H8DM3-2 1 Super H8DM3-2 Motherboard
CSE-825TQ-R700LP(B) 1 2U SC825TQ-R700LP Chassis (B = Black)
Air Shroud MCP-310-00030-01 1 Air Shroud
Backplane BPN-SAS-825TQ 1 SAS Backplane with Enclosure Management [ Manual ]
Cable(s) CBL-0084 1 6" 16-Pin Front Control Split Cable
CBL-0160L 2 US Power Cord 16AWG
CBL-0176L-01 2 IPASS to 4 SATA Cable
Driver CD CDR-A+NVDA2 1 Driver CD for MCP55 Chipset A+ Motherboard
Fan(s) FAN-0094L 3 Cooling Fan SC825
Hard Drive Tray MCP-220-00001-03(01) 8 3.5" Silver Hard Drive Carriers Trays (01 = Black)
Heatsink Components SNK-P0023P 2 Passive Heatsink for AMD Socket F CPUs
Mounting Rails MCP-290-00053-0N 1 Mounting Rail Set for SC825
Peripheral Drives DVM-PNSC-824V 1 Slim 8x DVD, 24x CD, DVD-ROM Drive
Power Supply PWS-702A-1R 2 700W Power Supply (Redundant)
PDB-PT825-N24 1 Power Distributor
Tray MCP-220-00007-00 1 USB Assembly Tray for SC825
MCP-290-00003-03(01) 1 Silver Floppy Tray Front Cover (01 = Black)