Key Features
1. 1 x Intel® Xeon® 4-Core Processor E5-1620v2, 3.7GHz, 10MB, LGA2011
2. 1 x 4GB DDR3 1333 240-Pin DDR3 ECC RDIMMs/UDIMMs (PC3 10666); Up to 256GB RDIMM or 64GB UDIMM;DDR3 up to 1600MHz
3. 1 x 500GB 7200 RPM SATA Hard Drive; 4x 3.5" SATA3 HDD bays, 90° rotating hard drive cage, 4x 2.5" internal HDD/SSD bays (opt.)
4. Graphics Card Options: NVIDIA Quadro 600, 2000, 4000 ...
5. Expansion slots: 2 x16 PCI-E 3.0, 1 x4 PCI-E 3.0 (in x8), 1 x4 PCI-E 2.0 (in x8), 1 x1 PCI-E 2.0 (in x4)
6. Intel® 82579LM and 82574L, 2x Gigabit Ethernet LAN ports
7. 4 USB 3.0 and 14 USB 2.0 ports
8. 900W Gold Level Power Supply
| Product SKUs | |
| SuperServer | * SYS-5037A-i (Black) |
| Motherboard | |
| Motherboard | * MBD-X9SRA |
| Processor/Cache | |
| CPU | * Intel® Xeon® processor E5-2600/1600; 8 or 6 Core processor * Socket R (LGA 2011) |
| System Memory | |
| Memory Capacity | * 8x 240-pin DDR3 DIMM sockets * Supports up to 256 GB DDR3 ECC Registered memory (RDIMM) * Supports up to 64 GB DDR3 ECC Un-Buffered memory (UDIMM) |
| Memory Type | * 1600/1333/1066MHz ECC DDR3, 240-pin gold-plated DIMMs |
| DIMM Sizes | * 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | * 1.5 V |
| Error Detection | * Corrects single-bit errors * Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | * Intel® C602 Chipset |
| SATA | * 2 SATA3 (6Gbps) and 4 SATA2 (3Gbps) * RAID 0, 1, 5, 10 |
| Network Controllers | * Intel® 82579LM and 82574L, 2x Gigabit LAN ports * Virtual Machine Device Queues reduce I/O overhead * Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Audio | * RealTek ALC889 7.1 High Definition Audio with S/PDIF header |
| TPM | * 20pin Header v1.2 |
| Input / Output | |
| Serial ATA | * 2 SATA 3.0 ports (6Gbps) * 4 SATA 2.0 ports (3Gbps) |
| SCU | * 4 SATA 2.0 ports (3Gbps) via SCU |
| LAN | * 2x RJ45 LAN ports |
| USB | * 4 USB 3.0 (5Gbps; 2 rear, 2 via headers) * 14 USB 2.0 (8 rear, 6 via headers) * Total 4 USB 3.0 and 14 USB 2.0 |
| Audio | * Line-in / Line-out / Microphone Ports |
| Serial Port / Header | * 2x Fast UART 16550 serial port (one header and one rear port) |
| Expansion Slots | |
| PCI-Express | * 2 (x16) PCI-E 3.0 slots * 1 (x4) PCI-E 3.0 in x8 slot * 1 (x4) PCI-E 2.0 in x8 slot * 1 PCI 32-bit slot |
| System BIOS | |
| BIOS Type | * 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | * DMI 2.3 * PCI 2.3 * ACPI 1.0 / 2.0 * USB Keyboard support * SMBIOS 2.3 |
| Chassis | |
| Form Factor | * Mid-Tower |
| Model | * CSE-732D4-903B |
| Dimensions | |
| Height | * 16.7" (424 mm) |
| Width | * 7.6" (193 mm) |
| Depth | * 20.68" (525.3 mm) |
| Weight | * Net Weight: 29.5 lbs (13.38 kg) * Gross Weight: 35.5 lbs (16.10 kg) |
| Available Colors | * Black |
| Front Panel | |
| Buttons | * Power On/Off button * System Reset button |
| LEDs | * Power LED * Hard drive activity LED * Network activity LED * System Overheat LED |
| Ports | * 2x Front side USB ports (USB 2.0 ready) |
| Drive Bays | |
| Hard Drive | * 4x 3.5" SATA3 HDD Bays * 90° rotatable tool-less hard drive cage * 4x 2.5" Internal HDD/SSD bays (optional) * Enterprise SATA HDD only recommended |
| System Cooling | |
| Fans | * 1x 12cm rear exhaust fan * Optimized Cooling Technology at 21dB Whisper-Quiet Operation |
| Power Supply | |
| 900W AC multi output power supply w/ PMBus | |
| AC Voltage | 100-240 V, 50-60 Hz, 10-6 Amp |
| +5V Standby | 3 Amp |
| +12V1 | 25 Amp |
| +12V2 | 25 Amp |
| +12V3 | 25 Amp |
| +12V4 | 25 Amp |
| +5V | 25 Amp |
| +3.3V | 25 Amp |
| -12V | 0.5 Amp |
| Certification |  80PLUS Gold |
| Note: | • Max. continuous combined load on +3.3V and +5V output shall not exceed 155W. • Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W. |
| PC Health Monitoring | |
| CPU | * Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. * 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | * Total of 5 fan headers supporting up to 5 fans |
| Temperature | * Monitoring for CPU and chassis environment * Thermal Control for 5x fan connectors * PECI |
| Operating Environment / Compliance | |
| RoHS | * RoHS Compliant |
| Environmental Spec. | * Operating Temperature: 10°C to 35°C (50°F to 95°F) * Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Copyright @ 2013 by Việt Máy Chủ . All Rights Reserved.